四虎影视在线影院在线观看,小s货再浪些再咬紧点h,国产精品水嫩水嫩,97精产国品一二三产区

Board logo

標題: [求助] 為什么我的/www/wdlinux/etc/php-fpm.conf內容不一樣 [打印本頁]
作者: 2878505611    時間: 2018-3-3 22:02     標題: 為什么我的/www/wdlinux/etc/php-fpm.conf內容不一樣

我有2個服務器按照了wdcp

A服務器的/www/wdlinux/etc/php-fpm.conf配件文件內容這樣：
  1. ;;;;;;;;;;;;;;;;;;;;;
  2. ; FPM Configuration ;
  3. ;;;;;;;;;;;;;;;;;;;;;

  5. ; All relative paths in this configuration file are relative to PHP's install
  6. ; prefix (/www/wdlinux/nginx_php-5.3.29). This prefix can be dynamicaly changed by using the
  7. ; '-p' argument from the command line.

  9. ; Include one or more files. If glob(3) exists, it is used to include a bunch of
  10. ; files from a glob(3) pattern. This directive can be used everywhere in the
  11. ; file.
  12. ; Relative path can also be used. They will be prefixed by:
  13. ;  - the global prefix if it's been set (-p arguement)
  14. ;  - /www/wdlinux/nginx_php-5.3.29 otherwise
  15. ;include=etc/fpm.d/*.conf

  17. ;;;;;;;;;;;;;;;;;;
  18. ; Global Options ;
  19. ;;;;;;;;;;;;;;;;;;

  21. [global]
  22. ; Pid file
  23. ; Note: the default prefix is /www/wdlinux/nginx_php-5.3.29/var
  24. ; Default Value: none
  25. ;pid = run/php-fpm.pid

  27. ; Error log file
  28. ; If it's set to "syslog", log is sent to syslogd instead of being written
  29. ; in a local file.
  30. ; Note: the default prefix is /www/wdlinux/nginx_php-5.3.29/var
  31. ; Default Value: log/php-fpm.log
  32. ;error_log = log/php-fpm.log

  34. ; syslog_facility is used to specify what type of program is logging the
  35. ; message. This lets syslogd specify that messages from different facilities
  36. ; will be handled differently.
  37. ; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
  38. ; Default Value: daemon
  39. ;syslog.facility = daemon

  41. ; syslog_ident is prepended to every message. If you have multiple FPM
  42. ; instances running on the same server, you can change the default value
  43. ; which must suit common needs.
  44. ; Default Value: php-fpm
  45. ;syslog.ident = php-fpm

  47. ; Log level
  48. ; Possible Values: alert, error, warning, notice, debug
  49. ; Default Value: notice
  50. ;log_level = notice

  52. ; If this number of child processes exit with SIGSEGV or SIGBUS within the time
  53. ; interval set by emergency_restart_interval then FPM will restart. A value
  54. ; of '0' means 'Off'.
  55. ; Default Value: 0
  56. ;emergency_restart_threshold = 0

  58. ; Interval of time used by emergency_restart_interval to determine when
  59. ; a graceful restart will be initiated.  This can be useful to work around
  60. ; accidental corruptions in an accelerator's shared memory.
  61. ; Available Units: s(econds), m(inutes), h(ours), or d(ays)
  62. ; Default Unit: seconds
  63. ; Default Value: 0
  64. ;emergency_restart_interval = 0

  66. ; Time limit for child processes to wait for a reaction on signals from master.
  67. ; Available units: s(econds), m(inutes), h(ours), or d(ays)
  68. ; Default Unit: seconds
  69. ; Default Value: 0
  70. ;process_control_timeout = 0

  72. ; The maximum number of processes FPM will fork. This has been design to control
  73. ; the global number of processes when using dynamic PM within a lot of pools.
  74. ; Use it with caution.
  75. ; Note: A value of 0 indicates no limit
  76. ; Default Value: 0
  77. ; process.max = 128

  79. ; Specify the nice(2) priority to apply to the master process (only if set)
  80. ; The value can vary from -19 (highest priority) to 20 (lower priority)
  81. ; Note: - It will only work if the FPM master process is launched as root
  82. ;       - The pool process will inherit the master process priority
  83. ;         unless it specified otherwise
  84. ; Default Value: no set
  85. ; process.priority = -19

  87. ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
  88. ; Default Value: yes
  89. ;daemonize = yes

  91. ; Set open file descriptor rlimit for the master process.
  92. ; Default Value: system defined value
  93. ;rlimit_files = 1024

  95. ; Set max core size rlimit for the master process.
  96. ; Possible Values: 'unlimited' or an integer greater or equal to 0
  97. ; Default Value: system defined value
  98. ;rlimit_core = 0

  100. ; Specify the event mechanism FPM will use. The following is available:
  101. ; - select     (any POSIX os)
  102. ; - poll       (any POSIX os)
  103. ; - epoll      (linux >= 2.5.44)
  104. ; - kqueue     (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
  105. ; - /dev/poll  (Solaris >= 7)
  106. ; - port       (Solaris >= 10)
  107. ; Default Value: not set (auto detection)
  108. ; events.mechanism = epoll

  110. ;;;;;;;;;;;;;;;;;;;;
  111. ; Pool Definitions ;
  112. ;;;;;;;;;;;;;;;;;;;;

  114. ; Multiple pools of child processes may be started with different listening
  115. ; ports and different management options.  The name of the pool will be
  116. ; used in logs and stats. There is no limitation on the number of pools which
  117. ; FPM can handle. Your system will tell you anyway :)

  119. ; Start a new pool named 'www'.
  120. ; the variable $pool can we used in any directive and will be replaced by the
  121. ; pool name ('www' here)
  122. [www]

  124. ; Per pool prefix
  125. ; It only applies on the following directives:
  126. ; - 'slowlog'
  127. ; - 'listen' (unixsocket)
  128. ; - 'chroot'
  129. ; - 'chdir'
  130. ; - 'php_values'
  131. ; - 'php_admin_values'
  132. ; When not set, the global prefix (or /www/wdlinux/nginx_php-5.3.29) applies instead.
  133. ; Note: This directive can also be relative to the global prefix.
  134. ; Default Value: none
  135. ;prefix = /path/to/pools/$pool



  139. ; The address on which to accept FastCGI requests.
  140. ; Valid syntaxes are:
  141. ;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific address on
  142. ;                            a specific port;
  143. ;   'port'                 - to listen on a TCP socket to all addresses on a
  144. ;                            specific port;
  145. ;   '/path/to/unix/socket' - to listen on a unix socket.
  146. ; Note: This value is mandatory.
  147. listen = 127.0.0.1:9000

  149. ; Set listen(2) backlog. A value of '-1' means unlimited.
  150. ; Default Value: 128 (-1 on FreeBSD and OpenBSD)
  151. ;listen.backlog = -1


  154. （字數限制，刪除部分）
  155. ;php_admin_value[error_log] = /var/log/fpm-php.www.log
  156. ;php_admin_flag[log_errors] = on
  157. ;php_admin_value[memory_limit] = 32M
  158.         
復制代碼
B服務器的/www/wdlinux/etc/php-fpm.conf的配置文件內容：
  1. <?xml version="1.0" ?>
  2. <configuration>
  3.         All relative paths in this config are relative to php's install prefix
  4.         <section name="global_options">
  5.                

  7.                                 Sets the limit on the number of simultaneous requests that will be served.
  8.                                 Equivalent to Apache MaxClients directive.
  9.                                 Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi
  10.                                 Used with any pm_style.
  11.                                 <value name="max_children">80</value>

  13.                                 （字數限制，刪除部分）

  15.                                 </value>

  17.                         </value>

  19.                
  20.                         <value name="request_terminate_timeout">180s</value>


  23. </configuration>        
復制代碼
兩個服務器引擎都是 nginx+apache。
請問這個是什么原因？

還有一個問題，上傳表格老是504錯誤，按照網站教程，好多參數都設置了大于100秒了，可是上傳表格執行到30秒 就504.



歡迎光臨 WDlinux官方論壇 (http://cd-genova.com/bbs/) Powered by Discuz! 7.2